Extron electronics IP Link Series User Manual page 45

Scheduling by day of the week
You can also select a day of the week and schedule all power and executive mode time
settings for that day at one time:
1. Click on a day of the week at the top of a column in the
table. Two
Set Schedule For
and one for
On Power Off
down menus for selecting on and off times as well as check boxes for selecting the
receptacle (power) and executive mode.
In figure 29, has been selected for scheduling.
Sunday
Figure 29. Schedule Screen Showing Fields for Daily Receptacle Scheduling
2. In either the or
Power ON
from the menus; and select the check boxes for the items you want to schedule.
3. In the section in which you made your selections, click
section closes.
4. If desired, repeat steps 2 and 3 in the other
If you do not want to make selections in the remaining
to close the section.
Refresh
5. Repeat steps 1 through 4 for any additional days that you want to schedule.
sections open, one for
and
Executive Mode Off
section, select the hours, minutes, and am or pm
Power OFF
Set Schedule For
IPL T PC1 • HTML Configuration and Control
scheduling
Receptacle 1
On and
Power Executive Mode
. These sections contain drop-
to enter your choices. The
Set
section.
section, click
Set Schedule For
37