Table of Contents
Advertisement
3.
If you are still experiencing problems, call the Extron S3 Sales & Technical Support Hotline.
Global Configurator Software
The Global Configurator 3 (GC 3.3) software is an alternative to using the default web pages
to configure and schedule the PC1. GC 3.3 is a free asset management software that
enables flexible, centralized, web-based power management for A/V systems. Using Global
Configurator software, administrators can view the immediate status and power level of an
output device, schedule actions such as powering on and off, monitor specified conditions,
and configure its ports.
To download the latest version of Global Configurator 3 from the Extron website:
1.
2.
3.
4.
5.
6.
7.
For instructions on using the GC3.3 software with the PC1, see the IPL T PC1 Setup Guide,
provided with the PC1, and to the Global Configuration 3.3 help program, accessible from
the GC3.3 main screen.
NOTE: GC 2.3 is the minimum version required to configure the PC1.
If a connection was not made, the following response appears:
Figure 41.
Response to an Unsuccessful Ping Command
If you get a response indicating that the ping was unsuccessful:
a.
Make sure your unit is using the appropriate subnet mask (check with your system
administrator).
b.
Make sure your PC does not have a software firewall program which might block
the IP address of the unit.
If contact is established with the unit, but the unit web pages cannot be accessed by
your web browser, verify (in the
is configured for direct network connection and not set up to use a proxy server.
Select the
tab on the
Download
Select
in the center menu icons.
Software
On the
page, click the
Download Center
menu. The
Global Configurator
Click on the
button in the
Download
Fill in the required information on the next
button (where
Download GCSWnnn.exe
Click
on the
Run
File Download
Follow the instructions on the subsequent screens to install GC3.3 on your computer.
or
menu) that your web browser
Options
Preferences
Extron website
home page.
Global Configurator
page opens.
line.
Version
Download Center
is the GC3 version number).
nnn
window.
IPL T PC1 • HTML Configuration and Control
icon from the center
page, and click the
46
Advertisement
Table of Contents
