Table of Contents
Advertisement
Valve block AirLINE SP Type 8647 is a modular, electro-pneu-
matic system consisting of connection and valve units. It is
intended for complete integration into the distributed Siemens
I/O systems "SIMATIC ET 200SP" and "SIMATIC ET 200SP HA".
The valve block is used to incorporate pneumatic pilot valves
directly in SIMATIC ET 200SP / SP HA and to activate them via
SIMATIC ET 200SP / SP HA. Pneumatic cylinders, pneumatically
actuated process valves or similar suitable pneumatic compo-
nents can be connected at the pneumatic outputs.
Parameterization and configuration take place using the same
tools as for SIMATIC ET 200SP / SP HA, e.g. SIMATIC "STEP 7",
"TIA Portal" or "PCS7". Integration in various PROFIBUS systems
or PROFINET systems occurs via GSD / GSDML. When configu-
ration tools from Siemens are used, integration via HSP or HUP
is alternatively possible. As a result, further functions and more
comfortable operation are possible.
10
english
Type 8647
System Overview
5.2
Connection units
Plug-in connection
for backplane bus
Connection unit,
middle
Connection unit, left
Plug-in connection
Fastening screws of
for load voltage
valve block to standard
Fig. 2:
Overview of connection units
The pneumatic supply and deaeration of the valve block occurs
via connection units. Furthermore, the valve block is fixed to the
standard rail via the connection units.
Connection unit,
LED display
(only connection
right
units with
pressure sensor)
Optional:
Pressure
gauge
rail
Version
Revision
Änderungsnr.
Änderungstext
Bürkert
Werkstoff
Fluid Control Systems
D-74653 Ingelfingen
Maße ohne Toleranzangabe
Name
Datum (yyyy-mm-dd)
Benennung
Ersteller
Längenmaße
Bearbeiter
Rundungshalbmesser
Status
Winkelmaße
Zeichn.Nr.
Klass-Nr. / Artikel-Nr.
Projekt-Nr.
Typ
Unterlagenart
Materialnummer
Dok.art
Ers.f.
Dokument-Id.
Var.stl.:
Maßstab:
Datum (yyyy-mm-dd)
Sprache
1/1
Blatt
Format
A3
SW
g
Masse:
Advertisement
Table of Contents
