Airline Sp Type 8647 In Combination With Simatic Et 200Sp Ha; Application Conditions; Maximum System Extension - Burkert 8647 AirLINE SP Quick Start Manual

6.1 AirLINE SP Type 8647 in combination
with SIMATIC ET 200SP HA
The valve block is integrated into the I/O system via the SIMATIC
ET 200SP HA profile rail.
A SIMATIC ET 200SP BaseUnit is required directly to the left of
the valve block (for the load voltage supply).
Please refer to the documentation of SIMATIC ET
200SP HA for information on how this BaseUnit may be
equipped (cover/for I/O modules of SIMATIC ET 200SP
released for SIMATIC ET 200SP HA).
SIMATIC SIMATIC
ET 200SP HA ET 200SP
(Interface 1 BaseUnit
and (load voltage
I/O modules) supply)
Fig. 6: Schematic station layout SIMATIC ET 200SP HA with
AirLINE SP Type 8647
Refer to section "6.3.3", page 15 for more information on the
layout.
The "Configuration in Run" function may be limited in
some circumstances.
6.2

Application conditions

Application conditions, e.g. the ambient temperature range, per-
missible installation position or applicable certifications, depend
14
Valve block Server
AirLINE SP module
Type 8647
english
Type 8647
Application Planning
on the applied modules of SIMATIC ET 200SP / SP HA (also see
the system manual SIMATIC ET 200SP / SP HA ).
consider the following when planning the power
supply:
Based on the properties of the applied valves, the
permissible tolerance of the load voltage is +/– 10%.
This value differs from the system properties of
SIMATIC ET 200SP / SP HA and from the specifications
of IEC 61131-2.
Recommendation (required in combination with
SIMATIC ET 200SP HA!):
→ Install a light-colored BaseUnit (type code BU...D or
BU...D/T) immediately in front of the valve block. As a result,
the valve block receives a separate load voltage supply.
6.3

Maximum system extension

6.3.1 Valve block
Valve slots Maximum of 64 (less when used with Type 0460
valves, 2x 3/2-way valve or the "AirLINE Quick"
control cabinet base adaptation)
Connection 0...10 (depends on the number of valve slots
units, middle and valve functions as well as the requirements
of the application)
Valve Maximum of 64
functions
Width Maximum 858 mm