Table of Contents
Advertisement
11.4.1 Pressure value display
The pressure value display is generally intended for use during
start-up.
Depending on the parameterization, the value ist displayed
– alternately with the normal status display (text messages are
suppressed!)
– permanently (all other displays are suppressed).
11.4.2 Priorities
priority message
1
Pressure value*
2
PROFIenergy
3
Standard message
(if several messages are
pending, they are dis-
played alternately with
"EVS active", wire break,
short circuit, switching
cycle counter, ...)
*)
At electronic base modules with eight valve slots only one
LC display is required to display the pressure value.
Lower priority messages are shown on the second LC display.
30
Higher priority messages
suppress lower priority
messages.
english
Type 8647
Start-Ups
11.4.3 Display contents
Display view with four positions
(from left to right channel 0–3 or
channel 4–7)
Display view with eight positions
(from left to right channel 0-7 or
channel 8-15)
Valve channel 0 activated
Valve channel 0 activated
Feedback: "Upper position (A)
reached"
Valve channel 0 activated
Feedback: "Lower position (B)
reached"
Pressure value display
Pressure
1.0 bar / 14.5 psi
Channel 1
Message 1 / Message 2
alternating:
Feedback error
lower position (B)
Message 1
Feedback Err.
Down 1
Message 2
Example of
other possible
messages:
feedback err.
up 1
Channel 1
Feedback error
upper position (A)
Advertisement
Table of Contents
