Table of Contents
Advertisement
Basic safety instructions
risk of injury due to unintentional activation and uncontrolled
start-up of the device and system.
▶ Secure the device and system to prevent unintentional
activation.
▶ Ensure that the system does not start up in an uncontrolled
manner.
risk of injury due to allergic reactions to lubricants.
▶ Avoid skin contact with lubricants.
▶ Wear protective gloves.
General hazardous situations.
To prevent injury, ensure the following:
▶ Do not transport, install or remove heavy devices without
the aid of a second person and using suitable auxiliary
equipment.
▶ Install the device according to the regulations applicable in
the country.
▶ Do not supply the medium connectors of the device with
aggressive or flammable media.
▶ Do not supply the medium connectors of the device with
liquids.
▶ After an interruption, ensure that the process is restarted in a
controlled manner.
Observe the sequence:
1. Connect power supply.
2. Charge with medium.
▶ Do not make any changes to the device.
▶ Do not subject the device to mechanical loading.
▶ Observe the general rules of technology.
Type 8647
In the event of a near-accident, inform the responsible
operator.
noTe
electrostatic sensitive components and modules.
The device contains electronic components which react sensi-
tively to electrostatic discharge (ESD). Contact with electrostati-
cally charged persons or objects are hazardous to these com-
ponents. In the worst case scenario, these components will be
destroyed immediately or will fail after starting up.
▶ To minimize or eliminate the risk of damage resulting from
sudden electrostatic discharges, ensure compliance with the
requirements of EN 61340-5-1.
▶ Do not touch electronic components while the supply voltage
is switched on!
english
7
Advertisement
Table of Contents
