Table of Contents
Advertisement
Playback Button page, you select the function and then the cuelist. That is to say that in order to
execute a cue, you press (and therefore highlight and make active) the "Go" button and then
select which cuelist you wish. The three other buttons on this page are described below.
Select
Mark as Main
Preset Info
a. This has the effect of loading and then unloading the second cuelist from the Main Go
buttons.
M
C
O V I N G A N D
D
I S P L A Y
Moving and copying cues in the Playback Button Display is somewhat limited. You are not
allowed to move or copy cuelists from the Playback Button display to anywhere other than the
same or a different Playback Button page. Nor can you copy or move cuelists from the playback
faders to the Playback Buttons. You are allowed only to move or copy cuelists from the Virtual
Cuelist to the Playback Button Display. Be aware that the same rules apply when copying a
cuelist: you're not creating a new cuelist, merely copying one. What's done in or to the copy will
be done in and to the original.
D
C
E L E T I N G
U E L I S T S I N T H E
T
O DELETE A
1 Press Delete
2 Select the cuelist you wish to delete on the touch screen
3 Press Enter
A
C
C T I V E
U E L I S T
To the right of the playback button display is the Active Cuelist View. In the screen shot on
page 129, you can see that the cuelist number and label are displayed, in this case cuelist 64
with a label of "override." Pressing a cuelist in this view has the effect of selecting it and making it
the active cuelist.
130
Select is used to load a cuelist into the Selected Cuelist View and Cuelist
Values windows. "Select" also allows you to access all functions that you
would normally have access to with a selected cuelist in a playback fader.
When selecting this button and then selecting a cuelist from one of the
playback buttons, that cuelist will be controlled by the Main Go buttons. To
unload the cuelist from the Main Go buttons, either select the same cuelist
again or select any other cuelist twice.
Preset Info is used to generate a report showing which fixtures are used in
which presets. In the current release of software, this feature is not yet full
implemented. For more information, please contact Martin Technical
Support.
C
O P Y I N G
U E L I S T S W I T H T H E
P
B
LAYBACK
UTTON
V
I E W
a
P
B
L A Y B A C K
U T T O N
C
UELIST
Maxxyz
P
B
L A Y B A C K
U T T O N
D
I S P L A Y
Advertisement
Table of Contents
