Table of Contents
Advertisement
3 Press the "Color" button. When you do, the following window will open:
4 Scroll down the list until you find the desired color and click on it.
5 Click on "Ok."
6 Click on "Back"
7 Click on "Deselect All." The color change will have been applied.
T
C
O
HANGE THE
1 Select the desired element
2 Move the cursor to the "Change" button and press it.
3 Press the "Rotation" button. When you do, the following window will open:
4 Press the right icon to rotate the element 22.5 degrees clockwise and the left to rotate 22.5
degrees counter clockwise.
5 Click on "Back".
6 Click on "Back" again.
7 Click on "Deselect All."
T
C
O
OPY AND
1 Select the element to be copied.
2 Click on "Copy."
3 Click on "Deselect All."
4 Move your cursor to the location where the new element is to be added.
5 Click on "Paste."
6 Press "Deselect All."
Please note that with all the above commands, you can right click and draw a "selection box"
around the desired elements to select more than one element at once. You can not however,
click on two different objects to select them as the second click will be interpreted as a "Move"
command.
W
ORKING WITH
Adding and then adjusting fixtures in the 2D layout can provide you with a quick, at-a-glance
representation of your rig. With the 2D layout, finding the fixture you want is quick and simple and
doesn't require you to remember the fixture number.
134
R
OTATION OF AN
P
E
ASTE AN
LEMENT
F
IXTURES IN
Maxxyz
E
LEMENT
2D L
AYOUT
Advertisement
Table of Contents
