Loading The Programmer Using Edit - Martin Professional Maxxyz User Manual

Table of Contents

Below is a screen shot using several of the fixture selection color identifiers:

You can see that fixture 53 is the currently selected fixture, that fixtures 54 through 58 are dark

green and can therefore be selected by using the next/previous functions and that all other

fixtures are currently deselected. Please note that the Next/Previous keys will toggle though only

those fixtures that are dark green.

O A D I N G T H E

R O G R A M M E R

S I N G

D I T

Once a cue has been created, it can be loaded into the programmer for editing.

Editing a cue is similar, but has some differences. You must first make a cuelist "active" (please

see "Playback Controls" on page 93 for information on activating cuelists). You can then press

"Edit," "Cue," and a cue number from the active cuelist and then "Enter." For example:

Edit Cue 1 Enter loads cue 1 of the selected cuelist into the programmer.

Note that directly to the right of the "Preset Name" toggle, we can see information telling us that

this is Cue 1 from Cuelist 2. By examining the information inside the window, we can see that

fixtures 51 through 62, MAC 2ks, are taken to a level of 100% by this cue.

The Programmer Window

Table of Contents