Sub /Group Dim; Submaster; Group Master - Martin Professional Maxxyz User Manual

S / G D
U B R O U P
The Sub/Group Dim cuelist type actually allows you to set the cuelist to one of two cuelist types:
submaster or group master. Both types of cuelists affect only the intensity attribute. Both cuelist
types will control only those fixtures that are contained in cue 1 of the cuelist.
Note! Neither Submasters nor Group Masters are affected by the Release key. The only
way to change the levels of Submasters or Group Masters is by moving its
associated fader.
When you select the Sub/Group Dim cuelist type, you will be presented with the following screen:
S
UBMASTER
When the cuelist type is set to Submaster, the intensity information of cue 1 in that cuelist will be
controlled by the associated fader. As the fader is raised, the intensity will raise to the values
recorded in the submaster. Other groups or cuelists can drive the fixtures contained in that
submaster to a higher level in a "highest takes precedence" manner.
G M
ROUP
The Group Master is an inhibitive submaster. It can not be used to raise the level of the fixtures it
contains, but the position of its associated fader will determine the output of the fixture(s) that are
recorded in cue 1 of the Group Master cuelist. The intensity level of the fixture recorded in the
Group Master is not used in calculating the output however, only those fixtures with an intensity
value of 3% or higher in cue 1 of the Group Master cuelist will be affected by the fader level. Note
that if a fixture is contained in one or more Group Masters, all of those group masters must be up
for the fixture's intensity to read on stage.
116
I M
ASTER
Maxxyz