Table of Contents
Advertisement
T
P
H E
R E S E T
Activate the preset screen by pressing the view button directly over the "Preset" label on the
playback touch screen. Within the preset screen are several buttons labeled with different
attribute groups. These attribute groups will record specific information from the programmer
screen. The information recorded depends upon which attribute group is selected.The groups
and their specific attributes are:
Dim Focus
Pan Tilt
Color
Gobo
Zoom Prism
Speed Effect
Framing
a. Please note that certain fixtures, for example the Mac 2k Profile, have a combination color
and gobo wheel. In such cases, that particular attribute will be found under "Color."
To the right of the attribute groups is the "Auto select" button. When highlighted (red), the
auto-select will automatically set the preset attribute page to match the active attribute group in
the programmer LCD keys. If you wish to record a different attribute group, press the attribute
group button on the playback touch screen and the appropriate display will appear.
R
P
E C O R D I N G
Recording presets is done in much the same way as recording groups. For example, select
fixture 51, a MAC 2k Profile from the tutorial, and focus it on the keyboard player. Repeat this
process with the other MAC 2ks, fixtures 52 through 62. With fixtures 51 through 62 on the
cylinder, selected in the programmer and "Pan Tilt" as the selected attribute group in the preset
window press "Record" and the desired preset number. As with groups, if you wish to label the
preset, press record, the desired preset button and then enter text using the keyboard and press
"Enter". You can also label a preset after it has been created by simply pressing the desired
preset and then entering the text with the keyboard.
If you now select the "Color" attribute group on the Programmer Touch Screen, you will note that
the preset page changes and your previously recorded "Pan Tilt" preset is no longer visible. By
default, recording a preset on this page will only capture the color attributes that are in the
programmer. (Again, if you didn't change the color when you were focusing the MAC 2ks, the
color attribute will not be loaded into the programmer and nothing will be recorded into the
preset.)
66
S
C R E E N
This group contains attributes such as Intensity, Shutter, Focus, etc.
This group contains attributes such as pan, tilt, pan/tilt speed, etc.
This group contains attributes such as color wheels, CMY and color
a
correction.
This group contains attributes such as Gobo wheels, rotation and
indexing.
This group contains attributes such as iris and prism.
This group contains attributes such as speed attributes.
This group contains attributes such as framing shutter information.
R E S E T S
Maxxyz
Advertisement
Table of Contents
