Table of Contents
Advertisement
Cue 1 has now been updated with the new cue times as is reflected in the cuelist view:
Looking at cue 1, you can see that under the header "Override" a value of "0s>>0s" is displayed.
This indicates that at least one attribute on at least one fixture has overridden the default fade
time and that it/they have a time range of 0 to 0 seconds. Had we programmed it so that half of
the fixtures faded-in in time zero while the other half faded-in in 10 seconds, the display would
read "0s>>10s."
S
ETTING THE
In the example above, we examined how to set a fade time for an individual attribute (intensity).
It is also possible to set the fade time for an entire attribute group, such as color. To do so:
1 Select the desired cuelist.
2 Select the fixtures you wish to change.
3 Press the "Fade" LCD key in the Playback Command.
4 Press the "Color" LCD in the programmer command.
5 Press 0 Enter (or the time of your choice) on the keypad.
We can see that all the color attributes have been set to a fade time of 0 seconds by looking at
the programmer window:
6 Press Record Cue xx Merge Enter to complete.
104
F
T
A
ADE
IME FOR AN
Maxxyz
G
TTRIBUTE
ROUP
Advertisement
Table of Contents
