Clearing Individual Attributes - Martin Professional Maxxyz User Manual

D C
EFAULT
This is a rather unique category in that it doesn't do any filtering per se, but it does allow you to
change the default filters used in the Clear Options window.
Set
Reset
C I
L E A R I N G N D I V I D U A L
While the Clear Options window is quite useful and effective in clearing out attribute groups, it is
also possible to clear individual attributes using the Clear key. Please refer to the screen below:
To clear the "Cyan" attribute from only the odd numbered MAC 2K's, we would use the following
keystrokes:
1 Select the group "2k Profile-2" from the Group touch screen.
2 Select the "Color" LED key on the programmer
3 Press and hold the "Clear" key on the keypad
4 Press the hard key in the programmer that is directly below the "Cyan" label in the Programmer
Touch Screen.
The programmer screen will then look like this:
84
ATEGORY
Pressing this button will cause the Maxxyz console to "remember"
any of the filters you have applied so that the next time you press
Clear, those same filters will be selected. Note: there is no feedback
when you press this button (it doesn't change color).
Pressing this button will cause the Clear Options window to return to
its default filter setting.
A
T T R I B U T E S
Maxxyz