Manipulating Fixtures; The 3 D Visualizer - Martin Professional Maxxyz User Manual

Table of Contents

ANIPULATING

When you select a fixture or a number of fixtures you will notice several changes on the console.

These changes are primarily found on the programmer touch screen and programmer controls,

but a number of the screens that are displayed on the playback touch screen and external

monitors are also effected. We'll start by selecting fixtures 51 through 62 and viewing some of the

affected screens.

THE

D VISUALIZER

When you select fixtures, those fixtures that are under active control of the programmer will be

highlighted in green or red in the visualizer. While both the red and green fixtures are selected, it

is important to note that only the attributes of the red fixture (the last fixture number of the

selected range) are displayed in the Programmer Control, although any fixtures that are

highlighted will be under the control of the keys and track belts on the Programmer Control. Once

you have adjusted one or more of the attributes of the selected fixture(s) and then select another

fixture or fixture(s), the first fixture will return to its deselected (grey) color and the new selection

will be highlighted in green. Changes made to the first selected fixture will remain visible on the

screen until the programmer screen is cleared.

IXTURES

Maxxyz

Table of Contents