Timecode; Timecode Cuelist Header - Martin Professional Maxxyz User Manual

T
I M E C O D E
The Maxxyz console allows for the connection to an external time clock for the synchronized
triggering of cues. Currently, only SMPTE is supported. When you select the Timecode cuelist
type, you will note the following box appears in the Cuelist Options window:
Here you may select SMPTE 30 NDF (non-drop frame), Internal SMPTE, or Net SMPTE. Only
SMPTE 30 NDF (external connection) and Internal SMPTE are supported at this time. After you
have made your selection, press "Confirm" to set the cuelist to the desired timecode source.
Once this is done, you will notice that the cuelist has changed to reflect its status as a timecode
cuelist.
T
IMECODE
You will note several additions to the header information in a Timecoded cuelist.
00:00:00:00
C H
UELIST EADER
This is where the received timecode is displayed. The format is
HH:MM:SS:FF. HH is hours, MM is minutes, SS is seconds and FF is
frames.
The Play button is used to start SMPTE when using the internal
timecode generator.
Working With Cues 117