T O Move Or Copy A Range Of Groups - Martin Professional Maxxyz User Manual

Similarly, if you wish to copy a group, use the "Copy" key and the following command line syntax:
• Copy Groupxx @ yy
Or you can press the Copy key, then press the desired group on the touch screen and then press
the location for the copy. By default, the copy will have the same name as the original but will be
appended with a number in parenthesis (ex: Mac 600 (1)). The number in parenthesis will
increment if additional copies are made.
T M
O OVE OR
It is also possible to move or copy a number of different groups simultaneously. You can not use
the touch screens for this operation; you must use the keypads. The following is an example of
the syntax utilized in this command:
• Move Group 1 Thru 3 + 12 @ 5 Enter
The following is the result of that screen:
Note that the Mac 600 group, formerly group 1 is now at Group 5 and the other selected groups
have moved in relation to the Mac 600 group.
In the event that one or more of the groups to be moved lands on an already recorded group, a
pop up window will appear offering four options. For this example, we will use the following
command: Move Group 11 + 13 @ 14 Enter. When we complete this command, we will see the
following window open on the left touch screen:
We are presented with four options:
• Skip - Selecting this option will leave group 13 in its original location and not change group 16,
but group 11 will be moved to group 14.
62
C R G
OPY A ANGE OF
Maxxyz
ROUPS