Table of Contents
Advertisement
3 Press "Record" and the group number of the original group.
4 Press "REPLACE with current selection."
D
ELETING A
To delete a group, press the "Delete" hard key, the desired group, and then "Enter." Alternatively,
you can press and hold the "Delete" key and then select a group using the touch screen.
S
E L E C T I N G G R O U P S
When a group is selected, it is highlighted in red in the group screen(s). Further, any group that is
a subset of that group is also highlighted in red. For example, if you were to select the group
"Mac 600" the group "600-2" would also be highlighted.
The selection of groups is a toggle based process. That is to say that if a group is not selected,
pressing its button will select it but if it is already selected, pressing the button will deselect it.
Again, if you were to press "All," all of the group buttons would highlight. If you were to then press
"Mac 2k Profile," the "Mac 600" and "Mac 500" buttons (and their subsets) would still be
highlighted, but the Mac 2k Profiles would no longer be selected.
G
P
R O U P
A G E S
The Maxxyz console is capable of managing thousands of groups. Naturally, these can not all be
displayed on a single screen. However, you can arrange your groups on various pages. The
number of groups per page is dependant on the size of the group window with the default view
set at 60. Therefore, the first group of the second page is 61. If you were to resize the window to
display 100 groups, the first group of the second page will be 101. To change the Group page,
use the "Page Up" and "Page Down" buttons found to the right of the group screen.
P
RESETS
Where the Groups function allows you to rapidly select fixtures, The Presets function and display
provide a method for rapidly recalling fixture channel attribute settings. Presets are also building
blocks for cues. If a preset is recorded into a cue or several cues and the preset is later edited, all
cues using that preset will be updated with the new preset information.
It is important to note that if a fixture is not recorded into a preset, it will not be affected by
that preset. If, for example, you create color preset 1 using fixtures 1-11, only fixtures 1-11
would be modified by that preset. The color of any other fixtures would remain
unchanged.
G
ROUP
Configuring Your Show
65
Advertisement
Table of Contents
