Table of Contents
Advertisement
In the above example, you can see that cue 6 will link back to cue 3 three times and then
advance to cue 7. If cue 7 were set as a Wait or a Follow, it would automatically advance after the
third loop back to cue 3.
Note:
When linking cues forward (i.e. linking cue 3 to cue 6), the Count will not apply.
Every time you go through cue 3, you will link forward to cue 6.
R
ELEASING A
Releasing (or clearing) a cuelist will cause the selected Playback Control to cease outputting
instructions to its associated fixtures and cancels any cues, chases, overrides, or timecode cues.
You can release a specific cuelist or you can release all cuelists.
R
E L E A S I N G A N
To release an individual cuelist use the "Rel" button in the Main Go area:
1 Press and hold the "Rel" button
2 Press the "Go" button of the desired Playback Control
3 Release both buttons
R
A
E L E A S I N G
There are two ways to release all cuelists
R
/S
EL
NAP
1 Press and hold the "Rel" and then the "Snap" button in the Main Go area
All attributes in all faders on all banks will return to their "home" position in the default fade time.
2 Release both buttons
S
/R
NAP
EL
1 Press and hold the "Snap" and then the "Rel" button in the Main Go area
All intensity values of all fixtures on all pages will fade to zero and then all other attributes in all
faders on all banks will return to their "home" position.
2 Release both buttons
M
, C
OVING
OPYING
P
F
LAYBACK
Accomplishing the above mentioned tasks on the Maxxyz console is extremely simple and
intuitive.
C
UELIST
I
N D I V I D U A L
C
L L
U E L I S T S
,
D
AND
ADERS
Working With Cues
C
U E L I S T
C
ELETING
UELISTS ON
123
Advertisement
Table of Contents
