Table of Contents
Advertisement
S
S
AVE A
HOW
As the only information that can be manipulated with the Maxxyz console is showfile data, that is
the only information that will be saved. To save a show
1 Press the "Menu" key in the Master Control section
2 When the pop-up window appears on the Playback Touch Screen, select "Save show as..."
3 Using the attached keyboard, enter a name for the file and press "Enter" in the pop-up window
(or on the keyboard).
4 The showfile is stored on the "C" drive of the left processor.
L
S
OADING A
To load a visualization file, please see "The Maxxyz Visualizer" on page 33. Loading a showfile
can only be accomplished during the boot up cycle of the Maxxyz console. To load a showfile
1 Turn on the console.
2 When the "welcome screen" appears ("Starting the Maxxyz" on page 21), select "Load a Show."
3 A pop-up window will appear.
4 Select the desired show and press "Enter."
D
OWNLOADING AND
Exchanging files between the Maxxyz console and other computers requires removable media.
Martin recommends a USB "thumb drive." To copy the visualization file, plug the thumb drive into
the USB port found on the front of the Maxxyz, near the Operator Audio. You can then copy a file
to or from the thumb drive. To copy the show file, plug the thumb drive into either of the USB
ports found on the rear of the console.
R
ECOMMENDED
The recommended (default) file location for the ".scn" file is: "My Computer\Shared
Documents\MSD4\Scenes".
The recommended (default) file location for the ".maxxyz" file is: "My Documents".
148
HOW
U
PLOADING
F
L
ILE
OCATION
F
ILES
Maxxyz
Advertisement
Table of Contents
