Adding Fixtures To The 2D Layout; T O Add Fixtures To The 2D Layout; Deleting Fixtures - Martin Professional Maxxyz User Manual

A
D D I N G F I X T U R E S T O T H E
Adding fixtures is accomplished via the "Patch" menu.
T A F
O DD
1 Select the Patch menu.
2 Press the "Fixtures" button to access the spreadsheet view.
To the far right of the spreadsheet, you will see a column labeled "Page."
3 In the "Page" column, highlight the cell(s) of the fixture(s) you would like to add to the 2D layout.
4 Press the "Edit" key.
After pressing the "Edit" key, a new window will open in the Patch screen:
5 Select the page you wish to put the fixtures on by scrolling through the list (A through Z) and
press "Ok."
6 The fixtures will be added to the 2D view immediately but before leaving this screen press
"Apply" and exit the spreadsheet view.
With the fixtures added to the 2D layout, you may now modify them as desired.
D F
E L E T I N G I X T U R E S
Deleting fixtures from the 2D layout does not unpatch them or remove them from the show. It
merely removes them from the 2D view.
2 D L
2D L
IXTURES TO THE
The 2D Stage Layout
A Y O U T
AYOUT
135