Selecting A Cuelist; Playback Command - Martin Professional Maxxyz User Manual

Directly above the LCD Key is the fader. The fader controls the intensity values of the fixtures in
the assigned cuelist. The fader will automatically return to its last position when changing
between playback pages.
The top button on the Playback Control (with the blue LED) is the Go button for that specific
cuelist. The button directly below the Go button is referred to as the "Default Button" and can be
programmed to perform a number of different functions. This button is configured in the Cuelist
Options screen. For more information, please see "Changing the Cuelist Type and Options" on
page 108.
S
ELECTING A
Only a cuelist that is selected can be modified or viewed on in the Cuelist display and only one
cuelist may be selected at any given time. Note that a cuelist needn't be selected in order to be
playing back the cuelist. To select a cuelist, press the LCD button at the bottom of the desired
Playback Control. The LCD will invert its display (clear lettering on a darkened background) to
indicate that it is currently selected.
P C
LAYBACK
Located to the right of the playback faders and the left of the main keypad is the playback
command. The playback command consists of 5 LCD keys, one jog wheel, and one track belt.
The playback command is used for manipulating cuelist information. The information and type of
control exerted by the playback command is dependent upon the active cue type. The possible
cue types that determine the information displayed are: 1) None, 2) Cuelist, 3) Chase, 4)
Override, 5) Sub/Group Dim and 6) Timecode. (For information on cue types, please see
"Working With Cues" on page 93.)
17. When recording the first cue into a new cuelist, that cuelist is automatically selected.
94
C
UELIST
OMMAND
17
Maxxyz