Table of Contents
Advertisement
None of these options are set as default.
C
O
C
LEAR
PTIONS
ATEGORY
Make Inactive
Full Clear (default)
E
F
C
XTRA
ILTERING
This category of filter is used to determine what information is affected based not on attribute
type, but on the value type. It also allows you to determine whether you will affect selected or
non-selected fixtures.
Selected (default)
Non-selected
Base Value (default
on)
Effect Value (default
on)
Timing Value
(default on)
F
C
ILTER
ATEGORY
In many ways, this category is akin to the Preset page filters. Using these filters, you can
determine which attribute groups will be acted on in the programmer. By default, all of these
filters are "on.".
Intensity Focus
Only those attributes which would be found in the Dim/Focus attribute
group will be recorded when this is selected.
P/T
Only those attributes which would be found in the Pan Tilt attribute group
will be recorded when this is selected.
Color
Only those attributes which would be found in the Color attribute group
will be recorded when this is selected.
Gobo
Only those attributes which would be found in the Gobo attribute group
will be recorded when this is selected.
Zoom/Prism
Only those attributes which would be found in the Zoom/Prism attribute
group will be recorded when this is selected.
Effects Speed
Only those attributes which would be found in the Effects/Speed attribute
group will be recorded when this is selected.
Framing
Only those attributes which would be found in the Framing attribute group
will be recorded when this is selected.
Defilter
Pressing this button will clear all selected filters from the Filter Category
Selecting this will cause the current command to make the selected
attributes inactive based upon the filtering applied elsewhere
This key causes the current command to clear the selected attributes
based upon the filtering applied elsewhere
ATEGORY
When highlighted, only selected fixtures will be affected
When highlighted, only non-selected fixtures will be affected
These values encompass the traditional attributes: pan, tilt, color,
gobo, etc.
These values are those that are associated specifically with effects:
pan swing, pan speed, pan mode, etc. For more information, please
refer to "Effects" on page 140.
These values are those that are associated with the "Delay" and
"Fade" overrides used to control when and how long a particular
attribute will move. For more information, please see "Setting an
Individual Attribute Fade Time" on page 103 and "Setting an Attribute
Delay Time" on page 105.
The Programmer Window
83
Advertisement
Table of Contents
