Deleting Or Editing A Macro; Linking Cues - Martin Professional Maxxyz User Manual

When selected, the Macro Editing screen will appear at the top of the cuelist:
5 From the left pull-down menu, select the macro type.
6 From the right pull-down menu select any cue.
Note that this cue needn't necessarily be loaded into a playback fader. A macro can be used to
trigger a cue in the Virtual Cuelist (see "Virtual Cuelist" on page 126 for more information).
7 Select "Apply" to save your changes.
D
E L E T I N G O R
Once inserted into a cuelist, a macro can later be edited or deleted. Use the following procedure:
1 Select the desired cuelist and view it in the Cuelist window.
2 Press the macro action (the cell that contains the macro type followed by the cuelist number).
3 To edit the macro, enter any changes in the trigger or cuelist selection then press apply.
4 To delete the macro, press "Delete Macro."
5 The edits to the macro will be applied.
L C
INKING UES
The Maxxyz console allows you to insert a special type of cue that will link one cue to another in
the same cuelist. In this way, you can go forward or backward through the list in a non-sequential
order. To link one cue to another:
1 Select the desired cuelist and ensure the Edit Mode is on.
E M
D I T I N G A A C R O
Working With Cues 121