Table of Contents
Advertisement
E
F
X T R A
I L T E R I N G
These three filter buttons determine which attribute groups will be loaded.
Base Channels
Effect Channels
Timing Channels
E
O
X T R A
P T I O N S
This button breaks the normal recording method of the Maxxyz console. The Maxxyz is a
tracking console. That is to say that when a change is made, it tracks that information forward
though the cuelist. However, there are occasions when you may wish to record information into
only one specific cue without it tracking. The "Cue Only" button will allow that. When selected,
information that is recorded into that cue will not track forward. It will be contained only within that
cue. The one exception to this is when "Cue Only" is selected and you record a new cue at the
end of a cuelist. In that eventuality, the information will be tracked forward.
F
C
I L T E R
A T E G O R Y
In many ways, this category is akin to the Preset page filters. Using these filters, you can
determine which attribute groups will be recorded into a cue, group or preset.
Intensity Focus
P/T
Color
Gobo
Zoom/Prism
Effects Speed
Framing
Defilter
C
A T E G O R Y
When selected the "Base Channels," those defined in the Dim/Focus,
Pan/Tilt, Color, Gobo, Zoom/Prism, Speed/Effect, and Framing attribute
groups found on the programmer LCD keys will not be recorded.
When selected, the "Effects Channels," those defined in the Regular
Effect and Time Effect attribute groups found on the programmer LCD
keys will not be recorded.
These values are those that are associated with the "Delay" and "Fade"
overrides used to control when and how long a particular attribute will
move. For more information, please see "Setting an Individual Attribute
Fade Time" on page 103 and "Setting an Attribute Delay Time" on
page 105.
C
A T E G O R Y
Only those attributes which would be found in the Dim/Focus attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Pan Tilt attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Color attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Gobo attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Zoom/Prism attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Effects/Speed attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Framing attribute group
will be recorded when this is selected.
Pressing this button will clear all selected filters from the Filter Category
Recording Cues
89
Advertisement
Table of Contents
