Selecting /Deselecting All Fixtures In The Programmer; Sing The Elected Ixtures Creen - Martin Professional Maxxyz User Manual

Intensity Fanning - The Maxxyz console allows you to rapidly assign a range of intensities to a
range of fixtures. Use the following procedure to implement Intensity Fanning:
1 Thru 5 @ 10 Thru 50 Enter
S / D
E L E C T I N G
Maxxyz provides three different ways to very rapidly determine which fixtures will be manipulated
in the programmer:
1 "." (decimal) Enter - Pressing "decimal enter" will select every fixture in the programmer and
allow you to make changes to all of them using the programmer controls.
2 "0" (zero) Enter - Pressing "zero enter" will deselect every fixture that is currently in the
programmer.
3 "." (decimal) "0" (zero) Enter - "Decimal zero enter" will select every fixture that is patched in
your show and place it in the programmer in a selected state.
U S
SING THE
The Maxxyz console also make use of a "Selected Fixtures Screen." You can find this screen by
selecting the "Groups/Select" view key over the Playback Controls touch screen or the "Fixture
Filter" view key over the Programmer Controls touch screen.
This screen is automatically populated with fixtures as you select them; either by the means
described above, or by selecting Groups (see "Groups" on page 59). In this screen you are
40
A
E S E L E C T I N G
F
ELECTED IXTURES
This will bring the intensity of fixture 1 to 10%, fixture 2 to
20%, fixture 3 to 30%, etc. Conversely, you could enter 1
Thru 5 @ 50 Thru 10 Enter. This would put fixture 1 at
50% and each of the following fixtures 10% lower.
F
L L I X T U R E S I N T H E
S
CREEN
Maxxyz
P
R O G R A M M E R