The Programmer Touch Screen - Martin Professional Maxxyz User Manual

Turning the jog wheel directly below the LCD keys will load the next page of attribute groups, if
any exist. For the MAC 2000 Profile, turning the job wheel will load the Speed/Effects attribute
group.
Turning to the first page of attributes and pressing the "Dim Focus" LCD key and you will notice
that it turns red. This indicates that the Dim/Focus attributes have been loaded on the
corresponding track belts. The color coding for the LCD keys is as follows:
Red
Orange
Green
T P
HE ROGRAMMER
When a fixture or fixtures are selected, the programmer touch screen is loaded with information
concerning the selected fixture. The information that is loaded into the programmer touch screen
is dependant on the attributes of the selected fixtures. When multiple fixture types are selected,
7. Different fixture types will result in different attribute groups being loaded into the LCD keys. Only
those attribute groups appropriate to the fixture will be loaded. If differing fixture types are selected
in the programmer simultaneously, the attributes of the last fixture selected (highlighted in red) will
be displayed.
54
The currently selected attribute group. Attributes belonging to this group will be
active on the corresponding track belts.
An attribute group that has previously been selected and where changes, visible
in the programmer screen, have been made.
An attribute group that is available but is not selected and no changes have been
made.
T
OUCH
S
CREEN
Maxxyz