Mitsubishi Electric RH-FRH Series Instruction Manual page 66

2 Unpacking to Installation
1) Select "6.ENHANCED" screen on the <MENU> screen.
<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
2) Press the [2] keys in the menu screen and select "2. WORK COORD."
<EMHANCED>
1.SQ DIRECT
123
3) Selection of the work coordinates number
Press the [FUNCTION] keys, and display "W: JUMP" function. Press the function key corresponding to
"W: JUMP"
<WORK COORD>
X: 0.00
Y: 0.00
Z: 0.00
W.JUMP W.GRID
123
Press numeral key [1] - [8] and specify the work coordinates number. The coordinate value of the specified
work coordinates system is displayed.
<WORK JUMP>
CHOOSE ONE OF THE WORK NUMBER
1-8.
123
Operation will be canceled if the
[CLOSE] key is pressed.
4) The teaching of the work coordinates system
Teach the three points shown in
POINT" at the upper right of the screen. If it differs, press the function key corresponding to each
point(WO, WX, WY) to teach. Move the robot's arm by jog operation (other jogging movement), and press
the function key corresponding to "TEACH."([F1]) The confirmation screen is displayed.
<WORK COORD>
X: 0.00
Y: 0.00
Z: 0.00
TEACH WX 123
Specify the teaching point [WO],[WX],[WY]
teaching the position [TEACH]
Confirming the operation
2-53
2.RUN
4.ORIGIN/BRK
6.ENHANCED
CLOSE
2.WORK COORD.
CLOSE
WORK NUMBER (1)
TEACHING POINT (WO)
CLOSE
CLOSE
Fig. 2-28. Confirm the name currently displayed on the "TEACHING
WORK NUMBER (2)
TEACHING POINT (WO)
WY
DEFINE
<EMHANCED>
1.SQ DIRECT 2.WORK COORD.
123
<WORK COORD> WORK NUMBER (1)
TEACHING POINT (WO)
X: 0.00
Y: 0.00
Z: 0.00
TEACH WY
WX 123
The screen shows the coordinate value of the origin
(WO) of the work coordinates number 1.
<WORK JUMP>
CHOOSE ONE OF THE WORK NUMBER
1-8.
123
<WORK COORD> WORK NUMBER (2)
TEACHING POINT (WO)
X: 0.00
Y: 0.00
Z: 0.00
W.JUMP W.GRID 123
The screen is the example which specified
the work coordinates number 2. ("2" at the
upper right of the screen)
<WORK COORD> WORK NUMBER (2)
TEACHING POINT (WO)
RECORD CURRENT POSITION.
OK?
Yes
123
CLOSE
DEFINE
CLOSE
CLOSE
No