Start The Warm-Up Program - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
7 Calibrate the Everest engine Base Camp 4140
engine Base Camp 4140
®
▶ Insert the Everest Insert at position ② into the gripping yoke, and screw the set
screw tight with a torque screwdriver ① (Mat. no. 1.005.0600) until you hear a
signal.
Note
The positioner must be removed before the insert is placed in the gripping yoke.

7.2.5 Start the warm-up program

▶ In the program Everest Base Camp Control in the menu Machine, select the
submenu Warm-up.
▶ Press the Start function key on the control panel.
|
7.2 Mill the calibration body
32/51