Lennox Prodigy M2 Application Manual page 65

Code Display Message
ALARM(98) CONTROLLER PROB-
98
LEM
ALARM(99) OUTDOOR ECON SEN-
99
SOR A24
ALARM(100) AIR VOL CONTROL
100
SETUP ERROR
ALARM(101) MGV CONTROL SETUP
101
ERROR
ALARM(102) GP CONTROL SETUP
102
ERROR
ALARM(103) ADVANCED CONTROL
103
SETUP ERROR
104 Reserved
ALARM(105) ADVANCED ECON
105
CONTROL SETUP ERROR
ALARM(106) BUILDING PRESS SEN-
106
SOR A34
ALARM(107) DUCT SUPPLY PRESS
107
SENSOR A30
ALARM(108) DUCT SUPPLY HIGH
108
PRESS SENSOR A30
ALARM(109) STRIKE 3 DUCT SUP-
109
PLY PRESS SENSOR A30
ALARM(110) WAITING ON NET-
110
WORK DATA
ALARM(111) CONTROLLER PROB-
111
LEM
ALARM(112) CONTROLLER PROB-
112
LEM
113 Reserved
ALARM(114) CONTROLLER PROB-
114
LEM
ALARM(115) UNIT OFFLINE FOR
115
TEST
116 Reserved
117 Reserved
118 ALARM(118) NO DISPLAY
STATUS(119) RESET CAUSED BY
119
WATCHDOG TIMEOUT
ALARM(120) ADD−ON BOARD MCB
120
PROBLEM
ALARM(121) LINE FREQ DOES NOT
121
MATCH UNIT CONFIG
ALARM(122) 24VAC PRIMARY VOLT-
122
AGE LOW
ALARM(123) 24VAC PRIMARY VOLT-
123
AGE HIGH
ALARM(124) 24VAC SECONDARY
124
VOLTAGE LOW
ALARM(125) 24VAC SECONDARY
125
VOLTAGE HIGH
ALARM(126) LINE PHASING DOES
126
NOT MATCH UNIT CONFIG
127 Reserved
128 ALARM(128) 24VAC POWER LOSS
129 Reserved
Action
INTERNAL CONTROLLER PROBLEM. RESET TO CLEAR.
CHECK SENSOR AND WIRING
CHECK FOR PROPER INSTALLATION OF GP BOARD AND SETTINGS
CHECK FOR PROPER INSTALLATION OF GP BOARD AND SETTINGS
CHECK FOR PROPER INSTALLATION OF GP BOARD AND SETTINGS
CHECK PRODIGY SETTINGS
CHECK ECON SWITCHES, DIALS, AND PRODIGY SETTINGS
CHECK SENSOR AND WIRING
CHECK SENSOR AND WIRING
CHECK SENSOR AND WIRING
CHECK SENSOR AND WIRING
CHECK NETWORK OR COMFORT SENSOR AND WIRING
INTERNAL CONTROLLER PROBLEM. RESET TO CLEAR.
INTERNAL CONTROLLER PROBLEM. RESET TO CLEAR.
POWER NOISE PROBLEM. RESET TO CLEAR.
CHECK PRODIGY SERVICE TEST MODE
DISPLAY NOT DETECTED
CONTACT LENNOX
MCB CONFIGURATION SETUP PROBLEM. RESET TO CLEAR OR AD-
VANCED SETUP.
Page 65
16. Diagnostics
PRODIGYT M2 UNIT CONTROLLER