84
3. Use a Phillips head screwdriver to
remove the two screws that secure
the plate onto the pump motor.
4. Mark the locations of the black wires.
5. Remove the black wires from the pump
motor.
6. Use a flat blade screwdriver to remove
the conduit retainer ring from the
pump motor.
7. Remove the conduit retainer and
conduit from the pump motor.
8. Use a 1/2 inch wrench to remove the
two nuts on the mounting plate.
9. Lift up on the pump motor then pull it off
the mounting plate.
10. If replacing the motor only, remove the
two screws connecting the filter
pump to the face of the filter motor.
11. Separate the pump and motor
assemblies.