Henny Penny KFC Velocity Series Service Manual page 37

1 1 . . 1 1 8 8 B B u u l l k k D D i i s s p p o o s s e e T T e e s s t t
Before performing this procedure, make sure the bulk oil
NOTICE
system is securely connected to the dispose port on the fryer
:
and the quick disconnect is engaged.
Ensure the bulk dispose process is working within specification by doing the following:
1. Press and hold the menu buttonuntil
*MAIN* appears on the display.
2. Press the number one product button to
enter the filter menu.
3. Press the right arrow until 4. DRAIN ->
displays.
4. Select 4 4 . . D D R R A A I I N N - - > > , and then cancel
after draining about 2" of oil in the fry
pot.
5. Press the right-arrow until 7. DISPOSE
displays.
6. Select 7 7 . . D D I I S S P P O O S S E E and let the motor
run for about 1 min., and then stop
the pump.
7. Wearing PPE, pull out the drain pan
and verify the oil pumped out of the
drain pan and into the bulk oil
system.
a) If oil pumped out of the drain pan, exit
out of the filter menu by pressing
and holding the menu button.
b) If oil did not pump out, troubleshoot
dispose plumbing, selector valve
issues etc.
8. Continue to the next inspection or
reinstall components as applicable.
N N O O T T E E : Replenish the oil in the fry pot by
pouring oil from a jug or from bulk oil as
applicable.
23