Henny Penny KFC Velocity Series Service Manual page 49

1. Lift and secure the lid. Refer to for
instructions.
2. Cover the fry pot with a sheet pan.
3. Inspect all 16 lid gasket retainer screws
around the perimeter of the lid
gasket.
4. Replace broken, striped or missing
screws.
N N O O T T E E : Apply red or blue Loctite to each
screw before installing. Torque to 18
in. lb. (2.03 Nm).
5. Tighten loose screws to 18 in. lb. (2.03
Nm).
6. Remove the lid gasket and inspect.
7. Replace the gasket if it has not been
replaced in the last 12 months, or if
hardened, brittle,
blackened.
8. If the gasket passes inspection, clean
the gasket with hot water and mild
detergent and reinstall.
9. Clean the entire pot band removing any
build up or debris.
10. Continue to the next inspection or
reinstall components as applicable.
damaged, or
35