Henny Penny KFC Velocity Series Service Manual page 45

Ensure the lid pressure pin switch is undamaged and working within specification by
doing the following:
1. Press and hold the menu button until
*MAIN* appears on the display.
2. Press the number two product button to
select INFO MODE.
3. Press the right arrow until INPUTS-2
displays. OK should be displayed
under Lid.
N N O O T T E E : OK indicates the switch is closed
and no pressure exists in the fry pot.
PR indicates the lid pressure pin
switch is open indicating pressure in
the fry pot.
4. Manually lift the upper pressure pin until
the microswitch changes position.
5. Verify that OK changes to PR on the
display. This means the switch is
working properly. If OK remains on
the display and does not change to
PR, take the fryer out of service
because this means the switch is
NOT working properly.
6. Troubleshoot the switch, wiring and
control, and repair or replace as
required.
7. Once the switch is working correctly,
continue to the next inspection or
reinstall components as applicable.
31