Henny Penny KFC Velocity Series Service Manual page 41

1. Use a flashlight to inspect the fittings of
the filtration plumbing and between
the filter pump and motor for oil
leaks.
2. Press and hold the menu button until
*MAIN* appears on the display.
3. Press the number one product button to
enter the filter menu.
4. Press the right arrow until 4. DRAIN ->
displays.
5. Select 4 4 . . D D R R A A I I N N - - > > , and drain about
half of the oil in the fry pot into the
drain pan.
6. Select 5 5 . . F F I I L L L L < < - - , and pump the oil
back in to the fry pot.
7. While the oil is pumping, use a flashlight
to inspect for oil leaks. If leaks are
detected:
- In the plumbing, disassemble, clean and
reassemble fittings using pipe thread
sealant on tapered thread fittings
and/or replace any flex lines, and/or
compression fittings as applicable.
- In the filter pump
disassemble and replace the seal
(and rollers) with a new seal kit.
and motor,
27