R&S NGE100B Series User Manual page 37

®
R&S NGE100B
Menu
Table 5-6: Interface menu hierarchy
Menu
Interface
Table 5-7: Device menu hierarchy
Menu
Device
Table 5-8: Utilities menu hierarchy
Menu
Utilities
User Manual 5601.1343.02 ─ 04
Menu items Descriptions
EasyArb Programs the waveform of the instrument voltage and cur-
rent settings for Ch 1. See
on page 44.
EasyRamp Configures the ramping time of the voltage for selected
channel. See
Menu items Descriptions
Ethernet Configures the Ethernet interface. See
The Ethernet option NGE-K101 must be installed for this
function to be available in the instrument.
WLAN Configures the WLAN interface. See
The WLAN option NGE-K102 must be installed for this
function to be available in the instrument.
Digital IO Configures the Digital Trigger I/O settings.
The Digital Trigger I/O option NGE-K103 must be installed
for this function to be available in the instrument.
USB Configures the USB connection. See
Requires restart of the instrument to apply the setting.
Menu items Descriptions
Information Displays instrument information. See
"Instrument
General Configures general instrument settings.
"General Instrument
License Displays license information and install license options.
See
Reset Resets instrument to factory default settings. See
ter 5.7.4, "Reset
Menu items Descriptions
System Test Provides self-test function for display screen, keypad back-
light, beeper and fan. See
on page 57.
Update Performs firmware update on the instrument. See
ter 5.7.6, "Updating the
Service This function is restricted for service personnel only.
Help Provides help information for the instrument. See
ter 5.7.7,
Instrument Functions
Chapter 5.5.3,
Chapter 5.5.4, "EasyRamp",
Information", on page 54.
Settings", on page 54.
Chapter 5.7.3, "Managing Options",
Instrument", on page 56.
Chapter 5.7.5, "System
Firmware",
"Help", on page 59.
User Interface
"EasyArb",
on page 45.
Figure 5-20.
Figure 5-21.
Figure 5-23.
Chapter 5.7.1,
Chapter 5.7.2,
on page 55.
Chap-
Test",
Chap-
on page 58.
Chap-
34