Table of Contents
Advertisement
®
R&S
NGE100B
SYSTem:TEST:SCReen
The instrument runs the system test: Screen Color Test.
Usage:
SYSTem:COMMunicate:SOCKet:DHCP[:STATe] <arg0>
This command sets or queries LAN interface mode. ON: automatic IP address from
DHCP server; OFF: manually set IP address.
Available only if option R&S NGE-K101 is installed.
Parameters:
<arg0>
SYSTem:COMMunicate:SOCKet:IPADdress?
This command queries IP address of the LAN interface.
Available only if option R&S NGE-K101 is installed.
Return values:
<arg0>
Usage:
SYSTem:COMMunicate:WLAN:CONNect
The instrument connects to the predefined wireless access point.
Available only if option R&S NGE-K102 is installed.
Usage:
SYSTem:COMMunicate:WLAN:DISConnect
The instrument stops the connection to the predefined wireless access point.
Available only if option R&S NGE-K102 is installed.
Usage:
SYSTem:COMMunicate:WLAN:IPADdress?
This command queries the IP address of the device when the wireless interface works
as a client.
Available only if option R&S NGE-K102 is installed.
Return values:
<arg0>
Usage:
User Manual 5601.1343.02 ─ 04
Event
Query only
Event
Event
Query only
Remote Control
Remote Control - Commands
78
Advertisement
Table of Contents
