R&S NGE100B Series User Manual page 54

®
R&S NGE100B
a) Select "Interface > Ethernet" menu item.
b) Select "DHCP & Auto-IP" for "IP Mode".
c) Enter the "IP Address".
d) Enter the "Subnet Mask".
e) Enter the "Default Gateway".
f)
g) Press Menu key to exit the dialog.
When the connection is alive, the LXI icon turns green on the status bar.
Table 5-13: Ethernet input field
Ethernet input field
MAC Address
Status
IP Mode
IP Address
Subnet Mask
Default Gateway
LAN Reset
Apply
User Manual 5601.1343.02 ─ 04
The R&S NGE100B displays the "Ethernet" dialog. See
Figure 5-20: Ethernet dialog
Select "Apply" to complete the configuration.
Instrument Functions
Connecting to a Network
Figure
Description
Shows the MAC address of this instrument.
Shows if the connection is up or down.
Static & Manual: Manually configure an IP address
for the instrument.
DHCP & Auto-IP: Automatically assign an IP
address to the instrument.
Address used in communication with the network.
Manually configure this field if IP Mode set to "Static
& Manual".
Secondary address used in communication with the
network.
Manually configure this field if IP Mode set to "Static
& Manual".
Gateway address to connect to the network.
Manually configure this field if IP Mode set to "Static
& Manual".
Restores the LAN settings to factory default.
It also removes the LXI web password.
Apply static IP settings.
5-20.
51