®
R&S
NGE100B
Figure 5-17: Ramping voltage output
1. Select "Output > EasyRamp" menu item.
The R&S NGE100B displays the "EasyRamp" dialog. See
Figure 5-18: EasyRamp dialog
2. Select the desired channel.
3. Set the selected channel to "Enabled".
The R&S NGE100B enabled the EasyRamp function for the selected channel.
Note: If selected channel is set disabled, corresponding output state of the selected
channel is also disabled.
4. Set the "Ramping Time" of the selected channel.
5. Press Enter key to confirm the settings.
Table 5-10: EasyRamp input field
EasyRamp input field
Ch 1, Ch 2, Ch 3
Ramping Time
User Manual 5601.1343.02 ─ 04
Instrument Functions
Advanced Functions
Figure
Description
Enable or disable the EasyRamp function individu-
ally for each channel.
Duration taken for the voltage to rise to V
5-18.
set
46