Table of Contents
Advertisement
®
R&S
NGE100B
Use only the power cord included in the delivery package. See
on page 18.
Before each measurement, measuring cables must be inspected for damage and
replaced if necessary. Damaged or worn components can damage the instrument or
cause injury.
The product may be operated only under the operating conditions and in the positions
specified by the manufacturer, without the product's ventilation being obstructed. If the
manufacturer's specifications are not observed, this can result in electric shock, fire
and/or serious personal injury, and in some cases, death.
Applicable local or national safety regulations and rules for the prevention of accidents
must be observed in all work performed.
The instrument is designed for use in the following sectors: Industrial, residential, busi-
ness and commercial areas and small businesses.
The instrument is designed for indoor use only. Before each measurement, you need
to verify at a known source if the instrument functions properly.
To disconnect from the mains, the low-heat device socket on the back panel has to be
unplugged.
See
tion, see the instrument product brochure (PN: 5214.8748.12).
Table 4-1: General data on instrument specification
Mains nominal voltage
Power consumption
Mains fuses
Temperature
Humidity
Display
Rack mount capability
Dimensions
Weight
User Manual 5601.1343.02 ─ 04
Table 4-1
for the general data on the instrument specification. For more informa-
AC
Maximum input power
115 V AC
230 V AC
Operating temperature range
Storage temperature range
Non-condensing
½ 19 "
W x H x D
R&S NGE102B
R&S NGE103B
Quick Start
Putting into Operation
"Delivery package"
115/230 V (±10 %) 50/60 Hz
180 W
IEC 60127-2/5 T 5 A 250 V
IEC 60127-2/5 T 2.5 A 250 V
0 °C to + 40 °C
- 20 °C to + 70 °C
5 % to 80 %
3.5 " (QVGA)
R&S HZC95 option
222 mm x 88 mm x 280 mm
(8.74 in x 3.46 in x 11.02 in)
4.9 kg (10.80 lb)
5.0 kg (11.02 lb)
17
Advertisement
Table of Contents
