Operation
5.2.4.5
Tested devices
The following list contains devices that were tested the together with the KL2904 TwinSAFE terminal. The
results only apply for the current device hardware version at the time of testing. The tests were carried out in
a laboratory environment. Modifications of these products cannot be considered here. If you are unsure
please test the hardware together with the TwinSAFE terminal.
Vendor
Type
Beckhoff
AX5801
Beckhoff
AX2000 AS option
Beckhoff
KL2964
Siemens
SIRIUS series S00
3RT1016-1BB42
Telemecanique
LP1K09
Dold
LG5929.54/100
The tests were carried out as function tests only. The information provided in the respective manufacturer
documentation remains valid.
Recommended protective circuits
We recommend R/C or diode-based protective circuits for these devices. Varistor-based protective circuits
should not be used.
5.3
Configuration of the terminal in TwinCAT
Do not change the register values!
Do not change the register values for the TwinSAFE terminals. Changes to the register values (e.g. with the
KS2000 configuration software or via register communication) sets the terminal permanently in the Fail-
Stop state!
5.3.1
Inserting a Bus Coupler
See TwinCAT automation software documentation.
5.3.2
Inserting a Bus Terminal
See TwinCAT automation software documentation.
30
Comment
TwinSAFE-Drive option card: safe restart lock
safe restart lock
3-channel contact extension with feedback
Contactor
Contactor
Extension module with potential-free contacts
NOTICE
CAUTION
Version: 3.1.0
KL2904