Table of Contents
Advertisement
Commissioning
4.3
PROFINET device (EL6631-0010) integration under
TwinCAT 2.11
This description applies to the PROFINET DEVICE EL6631-0010.
1. Integration of the EL6631-0010 into the EtherCAT network
Insert the EL6631-0010 into your TwinCAT project.
Fig. 11: Integration of the EL6631-0010 in the TwinCAT project
2. Integration of the PROFINET protocol
A PROFINET device must first be added - EL6631-0010.
Fig. 12: "Insert Device" dialog
This interface must be assigned to an adaptor class. This is composed of the MAC and IP address of the
network card. Use "Search" to look for the corresponding EtherCAT terminal. If there is only one terminal in
the system, it will be configured automatically.
36
Version: 3.4.0
EL6631-0010
Advertisement
Table of Contents
