Danfoss H1 Series Technical Information page 12

Technical Information
H1P 115/130 Axial Piston Single Pumps
Master Model Code
12 | © Danfoss | May 2018
A B Z D
H1P
F – Orifices related to control type
Code Tank (A+B) P orifice
No orifice
C3
– –
C1
– –
C2
– –
C4
1.0 mm –
C6
1.3 mm –
C7
0.8 mm 1.0 mm
D1
0.8 mm 1.3 mm
D2
1.0 mm 1.3 mm
D3
1.0 mm 1.3 mm
D4
0.6 mm 0.6 mm
D5
1.3 mm 1.3 mm
D6
– –
D7
E – Displacement limiter
None
N
Adjustable externally
B
No limiters, with nested springs, required for NFPE, AC, FDC
C
Adjustable externally with nested springs, required for NFPE, AC, FDC
D
*
Align with option Y: Settings for adjustment (if applicable).
G – End-cap options (Twin port, ISO 6162 split flange ports)
Code Align the options: M, N, T – Filtration below and K – Auxiliary mounting pads
D3
Internal charge supply for full charge flow filtration with pressure limiter
D6 Suction filtration with pressure limiter
D8 Remote or external charge supply for full charge flow filtration with pressure limiter
1)
K – Auxiliary mounting pads ISO 3019-1 flanges:
•
82–2 (SAE A, 9 and 11 teeth)
•
101–2 (SAE B, 13 teeth and SAE B-B, 15 teeth)
•
or None
F E G H J K
A/B orifices EDC, FNR
0.8 mm
1.3 mm
1.8 mm
– –
– –
– –
– –
– –
1.3 mm –
0.8 mm –
– –
3.0 mm –
1)
M N S T V W
MDC NFPE, AC
–
–
–
–
–
–
–
–
–
–
*
*
1)
1)
BC00000198en-US0901
X Y
FDC
–
–
–
–
–
–
–
–
–
–
–