Reading The Manual - Mitsubishi Electric MELSEC-F Series User Manual

FX -1PG User's Manual
3U

Reading the Manual

In this manual, the following formats are used for describing the common items.
Shows the manual title.
This area shows the
manual title for the current
page.
FX -1PG User's Manual
3U
2.4 Input Specifications
2.4.1 Input specifications
Input signal name
Group 1
Group 2
2.4.2 Internal input circuit
For the internal input circuit diagram, refer to the following.
The above is different from the actual page, as it is provided for explanation only.
12
Shows the title of the chapter and the title
of the section.
This area shows the title of the chapter and the
title of the section for the current page.
Item
STOP:
Deceleration stop input or used for interrupt input of External command positioning,
Interrupt 2-speed positioning operation
Group 1
DOG:
Used for DOG input of DOG type mechanical zero return operation or used for
interrupt input of External command positioning, Interrupt 1-speed positioning,
Interrupt stop, Interrupt 2-speed positioning operation
PG0: Zero point signal input
Group 2
Used for DOG type mechanical zero return operation
24 V DC
Signal voltage
(Power is supplied from S/S terminal.)
Input current 7.0 mA
ON current 4.5 mA or more
OFF current 1.5 mA or less
No-voltage contact input
Signal form Sink input: NPN open collector transistor
Source input: PNP open collector transistor
DOG input: 1 ms
Response time
STOP input: 4 ms
Circuit insulation Photo-coupler insulation
Operation display LED ON at input ON
Signal voltage 5 to 24 V DC
Input current 20 mA or less
ON current 4.0 mA or more
OFF current 0.5 mA or less
Signal form NPN open collector transistor
Response time 4 s or more
Circuit insulation Photo-coupler insulation
Operation display LED ON at input ON
Indexes the chapter number.
The right side of each page
indexes the chapter number
for the page currently opened.
2 Specification
2.4 Input Specifications
Specification
Refer to Section 5.1.
10
17
Reading the Manual
1
2
3
4
5
6
7
8
Shows the reference.
The " " mark indicates
a reference destination
9
and reference manual.