Table of Contents
Advertisement
86
Lights and visibility
Lights and visibility
Lights
Switching lights on and off
Switching on the side lights
– Turn the light switch
Switching on dipped headlights
– Turn the light switch to position
Switching off the lights
– Turn the light switch to position 0.
Fig. 51 Detailed view of
dash panel: lights, fog
light and rear fog light
control
⇒ fig. 51
to position
.
.
Switching on the front fog lights*
– Turn the switch from position
it. The symbol
in the light switch lights up.
Switching on the rear fog light (vehicles with front fog lights)
– Turn the lights control from position
and pull out ⇒
. A warning lamp placed in the warning and
control lamp panel lights up.
Switching on the rear fog light (vehicles with no front fog lights)
– Turn the light control to the end from position
it. A warning lamp placed in the warning and control lamp panel
lights up.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are
not bright enough to illuminate the road ahead and to ensure that other
road users are able to see you. Always use your dipped headlights if it is
dark or if visibility is poor.
Note
•
The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
or
to the first stop and pull
or
to the second stop
or
and pull
Advertisement
Table of Contents
