Navigation With Images; Road Signs; Route Guidance In Demo Mode - Seat LEON 2019 Owner's Manual

Navigation with images

Images main menu.
Fig. 225
Selecting an image and starting route
guidance
Press the Infotainment button and then
●

select the Images context.
›››
Press the Fig. 225
● SOURCE
ton and select the data storage device where
the images are stored.
If the image displayed was taken using GPS
●
localisation, the function button will appear.

Press to start guidance to a destination.
Road signs indication
The road sign indication must be active in the
›››
menu
Navigation settings
If there are road signs stored in the navigation
data for the route you are driving on, the sys-
Operating modes
tem can display them on the map (e.g. a
speed limit).
Take into account the age of the navigation
data and the limitations of the navigation sys-
›››
tem page 214
Recognition of road signs
Some vehicles have a road sign recognition
camera. If the vehicle has road sign recogni-
tion and it is active, road signs detected by
the system will be displayed on the map,
along with additional information.
Read and take into account the information
and indications of the road signs recognition
›››
system page
function but-

Route guidance in Demo mode

If demo mode is activated in the Navigation
menu, an additional pop-up win-
settings
dow opens when you start route guidance.
Pressing the
●
starts a "virtual route guidance" to the desti-
nation you have entered.
If you press the
●
"real route guidance" starts.
page 225.
!
78.
function button
Demo mode
function button, a
Normal
The development and operation of virtual
route guidance is compatible with the devel-
opment and operation of real route guidance.
Virtual route guidance is repeated after
reaching the fictitious destination and re-
starts from the starting point, if it is not inter-
rupted beforehand.
When the starting point of the Demo mode is
manually set in the Navigation settings
menu, the virtual route guidance starts from
that position.
A manually entered starting point is overwrit-
ten with the current location of the vehicle, if
the vehicle starts moving.
Note
Deactivate the Demo mode after use, oth-
erwise you will always have to select
whether to start a virtual route or normal
route before starting route guidance.
Navigation settings
In the Navigation main menu, press the
●
function button.
SETTINGS
Function button: function
: To make the route calculation adjust-
Route options
ments.
»
225