Seat LEON 2019 Owner's Manual page 175

Function button: function
Closes the Configuration Wizard, and
the main menu or last mode in which
CLOSE
you used the Infotainment system will
appear.
Disables the possibility of changing
the settings of the Infotainment sys-
tem. To configure the system go to:
NEVER
and select Con-
System settings
figuration wizard
Starts up the Configuration Wizard.
START
If the system includes navigation, the
date and time are set automatically
A
by the GPS.
Search and save the radio stations
with the best reception at that time in
B
all available bands.
Link your mobile phone to the Infotain-
C
ment system.
Add your home address using your
a) current position or by manually enter-
D
ing an address.
Previous or next parameter to config-
ure.
When a parameter has been config-
PREVIOUS
ured, the only way to reconfigure it is
by clicking on it on the main menu, not
NEXT
by using the Previous/Next buttons.
When you configure a parameter,
will be displayed over it.
Function button: function
Once one or more settings have been
applied, finalise the configuration in
the main menu of the wizzard.
If you have not set all the parameters,
FINISH
the Initial Configuration Wizard will
start the next time you turn the Info-
tainment system on.
a)
Only valid for Navi System and Navi System Plus.
.
Menu and system settings
The settings that can be selected varies de-
pending on the country and the equipment in
question, and on the vehicle's equipment.
Press the Infotainment button
●
then press the
Press the function button of the main menu or
the functions for which you want to change
the settings. All settings are automatically
applied when the menus are closed.
Function button: function
: To change the screen settings.
Screen
: To select the main menu display mode
Menu
( Mosaic or Carousel ).

Introduction
and
  
function button.
SETTINGS
Function button: function
: If this function is
Switch off screen (in 10 seconds)
active and the infotainment system is not used,
the screen will automatically switch off after ap-
prox. 10 seconds. Pressing the screen or pressing
one of the infotainment buttons will turn the
screen on again.
: To select the brightness level of the
Brightness
screen.
: To select the type of display ( Day ,
Day / Night
or Automatic ).
Night
: The confirmation tone when a
Touchscreen tone
function button is pressed is active.
: In standby mode, the
Show clock in standby mode
time is displayed on the infotainment system
screen.
: Change the time and date settings.
Time and date
: To select the time source (GPS
Clock time source
or manual).
: The time and date can be selected using
GPS
the function button. In this case, the
Time zone
and function buttons for manual
Time Date
entry will not be active.
: The time and date can be set manual-
Manual
ly using the and function buttons.
Time Date
: To set the time manually.
Time
: To adjust the desired time zone.
Time zone
: To select the time display format (12
Time format
or 24 hours).
: To set the current date.
Date
»
173