In the case of variable messages on over-
●
head or gantry signs (LED-based variable
traffic signs or other lighting units).
If the maps on the navigation system are
●
not up-to-date.
In the case of adhesives affixed to vehicles
●
that depict traffic signs, e.g. speed limits on
lorries.
WARNING
The technology in the traffic sign detection
system cannot change the limits imposed
by the laws of physics and only works with-
in the system's limits. Do not let the extra
convenience afforded by the traffic sign
detection system tempt you into taking any
risks when driving. The system is not a re-
placement for driver awareness.
Adapt your speed and driving style to suit
●
visibility, weather, road and traffic condi-
tions.
Poor visibility, darkness, snow, rain and
●
fog may lead to the system failing to dis-
play traffic signs or not displaying them
correctly.
If the camera's field of vision is dirty, cov-
●
ered or damaged, system operation may
be impaired.
WARNING
The driving recommendations and traffic
indications shown on the traffic sign detec-
80
Operation
tion system may differ from the actual cur-
rent traffic situation.
The system may not detect or correctly
●
show all the traffic signs.
Traffic signs and traffic regulations have
●
priority over the recommendations and dis-
plays provided by the system.
WARNING
If messages are ignored, the vehicle may
stall in traffic and cause accidents and se-
vere injuries.
Never ignore the messages displayed.
●
Stop the vehicle at the next opportunity
●
and in a safe place.
Note
To avoid affecting the correct operation of
the system, take the following points into
consideration:
Regularly clean the area of vision of the
●
camera and keep it in a clean state, without
snow or ice.
Do not cover the field of vision of the
●
camera.
Always replace damaged or worn blades
●
when required to avoid lines on the cam-
era's field of vision.
Check that the windscreen is not dam-
●
aged in the area of the camera's field of vi-
sion.
The use of outdated maps on the naviga-
●
tion system may cause the system to show
traffic signs incorrectly.
In the waypoints mode of the navigation
●
system, the traffic sign detection system is
only partly available.
Failure to heed the control lamps and
●
corresponding text messages when they
light up may result in damage to the vehi-
cle.
Time
Setting the time on the infotainment sys-
tem
Press the infotainment
●
Press the Vehicle > SETTINGS function
●
button.
Select the menu option Time and date to
●
›››
set the time
page
92.
Setting the time on analogue the instru-
ment panel
To set the time (for all vehicle clocks), press
●
and hold the button
on the instrument
panel until the Time is displayed.
Release the button
. The time is dis-
●
played on the instrument panel display and
the hours field is highlighted.
button.