Seat LEON 2019 Owner's Manual page 183

Activation of Full Link
Full Link Setup
Fig. 187
Full Link menu
Fig. 188
1)
Using the data connection to transfer the
smartphone apps to Full Link may involve addi-
tional charges. Please check the charges with
your operator.
Connectivity
Data connection via Wi-Fi or SIM is not
necessary to establish the connection be-
tween the smartphone and Full Link.
Data connection via Wi-Fi or SIM is neces-
sary to enable all of the app features
Proceed as follows to use Full Link:
Switch on the Infotainment system
●
Connect the smartphone to the vehicle's
●
›››
USB port using a USB cable page
In the main menu for the Full Link setup, se-
●
lect Activate data transfer for SEAT
›››
Fig. 187.
apps
Finally, a message will appear stating that
data transfer will commence when the device
is connected. Please note that data is trans-
ferred over connections between your vehi-
cle and mobile device. Press OK. Once selec-
ted, the technology compatible with your de-
vice can be used.
Note
Depending on your smartphone, it may
have to be unlocked for the connection to
occur.
What should I do if it does not con-
nect?
Restart the mobile device.
1) .
Check the USB cable. Check whether the
USB cable is damaged. Check that neither
connection (USB/micro USB) is damaged or
worn.
Check that the USB ports are correctly
245.
connected. Check that the USB port of the
vehicle and the device are not damaged
and/or deteriorated.
Clean the USB ports (device and vehicle).
●
Try with another compatible mobile device.
●
Have the USB port replaced at a SEAT au-
●
thorised service.
Have the mobile device repaired or replace
●
it.
181