Hook the wire through one of the grooves of
●
the trim.
Insert the box spanner through the hook,
●
rest it on the tyre and remove the wheel
›››
trim
Fig.
35.
Fitting
Press the trim against the wheel so that the
●
hole for the valve fits over the tyre valve.
Make sure that the trim is correctly fitted all
●
the way around the wheel. If you are using an
anti-theft wheel lock, screw it in the opposite
position to the valve.
Wheel bolt caps*
Wheel: wheel nuts with caps.
Fig. 36
42
Emergencies
Removal
Fit the plastic clip (vehicle tools
●
over the cap until it clicks into place
›››
Fig.
36.
Remove the cap with the plastic clip.
●
The caps protect the wheel nuts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a
special cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
nuts.
Anti-theft wheel nuts
Anti-theft wheel bolt with cap and
Fig. 37
adapter.
Loosening the anti-theft wheel bolt
Remove the wheel cover* or the cap*.
●
Insert the special adapter
●
›››
hicle tools
page
›››
Fig.
32)
wheel bolt and push it on as far as it will go.
Insert the wheel brace (vehicle tools) onto
●
the adapter as far as it will go.
Remove the wheel bolt
●
Note
Make a note of the code number of the an-
ti-theft wheel bolt and keep it in a safe
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
›››
Fig. 37
(ve-
1
38) onto the anti-theft
›››
page
43.