Seat LEON 2019 Owner's Manual page 65

Position of the bulbs in the bulb holder
Fig. 66
The rear lid must be open to change the
bulbs.
Remove the rear lid cover in the direction
–
›››
indicated Fig. 65 .

Unlock the retaining tabs of the bulb
– A
holder, following the direction of arrows
›››
and Fig. 65 .

2
Remove the bulb holder, moving it in the di-
–
›››
rection of arrow Fig. 65
3
Lightly press the defective bulb into the
–
bulb holder , then turn it to the left
1
›››
remove it Fig. 66.
Fit the new bulb, pressing it into the bulb
–
holder and turn it to the right as far as it will
go.
Use a cloth to remove any fingerprints from
–
the glass part of the bulb.
Check that the new bulb works properly.
–
Fuses and bulbs
Reinstall the bulb holder, making sure that
–
locking clips
clipped on.
Replace the cover of the rear lid lining.
–
LED tail light bulbs located in the
rear lid
1
Remove the cover from the rear lid
Fig. 67
.

and
2
Remove the bulb holder.
Fig. 68
›››
Fig. 65 are properly
A 
The rear lid must be open to change the
bulbs.
Remove the rear lid cover in the direction
–
›››
indicated Fig. 67.
Turn the reverse lights bulb holder anti-
–
clockwise in the direction of the arrow
›››
Fig. 68.
Remove the bulb holder from its housing
–
Change the defective bulb and reinstall the
–
bulb holder in its housing, following these
instructions in reverse order.
Check that the new bulb works properly.
–
1
.
2
63